|
6.2.0.118
|
2019-12-17
|
General: Fixed issue with some computers unable to obtain a license when running Inventor 2020.
If you currently are using an iPropWiz 6 build older than 6.1.1.108 (June 2, 2014), you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.2.0.117
|
2019-05-02
|
General: Updated to support Inventor 2020.
NOTE: Inventor 2020 will be the last Inventor release supported by iPropWiz 6. iPropWiz 7 coming soon.
If you currently are using an iPropWiz 6 build older than 6.1.1.108 (June 2, 2014), you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.2.0.114
|
2018-08-27
|
General: Updated to support Inventor 2019.
Configuration Editor: Fixed issue with iPropWiz not loading (sincere apologies to all for the bad build 6.2.0.112).
If you currently are using an iPropWiz 6 build older than 6.1.1.108 (June 2, 2014), you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.2.0.112
|
2018-08-06
|
General: Updated to support Inventor 2019.
Configuration Editor: Fixed some issues with keyboard navigation in list editor.
If you currently are using an iPropWiz 6 build older than 6.1.1.108 (June 2, 2014), you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.183
|
2017-11-06
|
Property Editor: Fixed issues with navigating grid using tab/enter/arrows keys in Inventor 2018.
The update file no longer includes third party dll's.
If you currently are using an iPropWiz 6 build older than 6.1.1.108 (June 2, 2014), you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.175
|
2017-04-03
|
General: Updated to support Inventor 2018.
The update file no longer includes third party dll's.
If you currently are using an iPropWiz 6 build older than 6.1.1.108 (June 2, 2014), you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.171
|
2016-10-17
|
Property Editor: Fixed issue where part model or flat pattern extents failed to update. This issue often crashed iPropWiz.
Property Editor: Custom library parts now can export model extents properties.
The update file no longer includes third party dll's.
If you currently are using an iPropWiz 6 build older than 6.1.1.108 (June 2, 2014), you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.167
|
2016-09-04
|
Property Editor: Fixed issue with updating model properties from drawing environment.
The update file no longer includes third party dll's.
If you currently are using an iPropWiz 6 build older than 6.1.1.108 (June 2, 2014), you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.164
|
2016-07-05
|
Property Editor: Fixed issue with flat pattern extents calculation causing iPropWiz crash. This issue was introduced in build 6.1.1.159.
The update file no longer includes third party dll's.
If you currently are using an iPropWiz 6 build older than 6.1.1.108 (June 2, 2014), you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.161
|
2016-06-15
|
Configuration Editor: Fixed issue with copying properties between property sets in a configuration. This issue appeared only in the German language version of iPropWiz.
The update file no longer includes third party dll's.
If you currently are using an iPropWiz 6 build older than 6.1.1.108 (June 2, 2014), you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.159
|
2016-05-16
|
Property Editor: Improved calculation of model and flat pattern extents. Parts with spline based surfaces may still report larger extents only if the extents are with respect to a UCS or the principal axes.
The update file no longer includes third party dll's.
If you currently are using an iPropWiz 6 build older than 6.1.1.108 (June 2, 2014), you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.155
|
2016-04-14
|
Property Editor: Fixed issue with model extents reporting for library parts.
General: The add-in now works with Inventor 2013-2017.
The update file no longer includes third party dll's.
If you currently are using an iPropWiz 6 build older than 6.1.1.108 (June 2, 2014), you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.145
|
2015-04-27
|
Property Editor: Fixed issue with property expression overrides not sticking.
General: The add-in is digitally signed to meet security guidelines for Inventor 2016.
The update file no longer includes third party dll's.
If you currently are using an iPropWiz 6 build older than 6.1.1.108 (June 2, 2014), you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.144
|
2015-02-16
|
Property Editor: Fixed issue with prompt to save properties when no update required.
See special update instructions included in the update zip file.
If you currently are using an iPropWiz 6 build older than 6.0.5.103, you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.142
|
2015-02-09
|
Property Editor: Further revision to highlighting and update for properties that are missing in selected documents.
See special update instructions included in the update zip file.
If you currently are using an iPropWiz 6 build older than 6.0.5.103, you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.141
|
2015-02-07
|
Property Editor: List drop down now automatically adjusts to show all data in value and description (if included) columns.
Property Editor: Tree lists now automatically resize to show all data in value column at current level.
Property Editor: Fixed issue with highlighting and update for properties that are missing in selected documents.
See special update instructions included in the update zip file.
If you currently are using an iPropWiz 6 build older than 6.0.5.103, you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.138
|
2014-12-09
|
General: Fixed regression in Build 6.1.1.136 - New users unable to activate license.
See special update instructions included in the update zip file.
If you currently are using an iPropWiz 6 build older than 6.0.5.103, you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.136
|
2014-12-02
|
Property Editor: Fixed regression in Build 6.1.1.130 - unable to edit numeric property values.
Property Editor: Fixed issue with activating PE settings when configuration folder is not defined.
See special update instructions included in the update zip file.
If you currently are using an iPropWiz 6 build older than 6.0.5.103, you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.130
|
2014-11-05
|
Property Editor: Improved consistency of documents shown in hierarchical and sorted views.
Property Editor: Fixed issue with improper display of physical properties in systems with comma as decimal separator.
Property Editor: Fixed issue with restoring PE when opening drawing document as the only open document.
Property Editor: Added check for correct property type assignment.
See special update instructions included in the update zip file.
If you currently are using an iPropWiz 6 build older than 6.0.5.103, you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.124
|
2014-09-15
|
Property Editor: Fixed regression that caused Inventor crash and/or iPropWiz Property Editor instability.
See special update instructions included in the update zip file.
If you currently are using an iPropWiz 6 build older than 6.0.5.103, you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.120
|
2014-08-27
|
General: Further improvements to graphics resources management.
Property Editor: Fixed issue where PE did not appear after trying to reopen as floating window, especially on 2nd monitor.
Property Editor: Added OK button to PE when it is undocked from Inventor window. Click OK to apply changes and hide PE window.
Property Editor: Fixed issue with capitalization execption not being obeyed on unchanged values.
See special update instructions included in the update zip file.
If you currently are using an iPropWiz 6 build older than 6.0.5.103, you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.117
|
2014-07-23
|
Property Editor: Improved control of floating property editor window. Fixed issue with minimum sized editor window.
Property Editor: Fixed issue where property expression creation fails if driving property value is blank.
Property Editor: Improved tooltip for required property value.
Configuration Editor: Fixed regression that prevented creation of new property format rules.
General: Introduction of iPropWiz language packs. The first language pack provides a German language user interface.
The full install of iPropWiz 6 will always install all available language packs.
If you are using the standard automatic update method to update iPropWiz, you must update to the latest release of iPropWiz.
You can then download and install any of the available iPropWiz language packs to include support for that language.
Additional language packs will become available in the future.
See special update instructions included in the update zip file.
If you currently are using an iPropWiz 6 build older than 6.0.5.103, you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.111
|
2014-06-05
|
Property Editor: Fixes issue where floating Property Editor is not visible after starting PE command .
See special update instructions included in the update zip file.
If you currently are using an iPropWiz 6 build older than 6.0.5.103, you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.108
|
2014-06-02
|
General: Upgrade to enable on-line license activation at our new web hosting service. Prior versions cannot be automatically activated via our licensing web service.
There are no functional updates in this build, it has the same functionality as build 6.1.1.104.
See special update instructions included in the update zip file.
If you currently are using an iPropWiz 6 build older than 6.0.5.103, you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.1.1.104
|
2014-05-17
|
General: Updated grid component fixes memory leak issue that caused Inventor to run out of graphics resources if the PE was active for long periods of time.
Property Editor: Fixed issue where PE could not be activated after changing to Stress Analysis environment.
Property Editor: Better handling of restoring floating Property Editor.
Property Editor: Fixed issue with column sizing error when first starting PE.
Lists: Increased list capacity. Simple text lists can contain up to 9999 rows, all other lists up to 1999 rows.
See special update instructions included in the update zip file.
If you currently are using an iPropWiz 6 build older than 6.0.5.103, you must uninstall iPropWiz 6 and reinstall using the full installation.
|
|
6.0.5.111
|
2014-04-03
|
Property Editor: Fixed issue with iPropWiz interfering with Inventor commands. Example was crash when using Inventor Change Size command to resize content center component.
Property Editor: Fixed issue with Drawing View context menu incorrectly showing Drawing Sheet context menu if iPropWiz property editor is visible.
Property Editor: Fixed issue with incomplete iPropWiz property editor update when switching between drawing documents.
Property Editor: Fixed issue with changing selection in property editor doucment browser when active assembly has never been saved.
Property Editor: Fixed issue with Comments property cell overwriting value unexpectedly.
Property Editor: Improved first time startup workflow. User is now prompted to select a configuration if none is selected. All other interaction with property editor is disabled until a valid configuration is selected.
See special update instructions included in the update zip file.
|
|
6.0.5.106
|
2014-04-01
|
Property Editor: Added Options command to toolbar.
Property Editor: Added option to control update of exported physical properites for assemblies when the assembly is saved. Leaving this off can significantly improve save performance of large assemblies.
See special update instructions included in the update zip file.
|
|
6.0.5.103
|
2014-02-25
|
Property Editor: Improved process for capitalizing text based properites.
Property Editor: Apply and Reset buttons now enabled on any change in a property value cell. Using the Tab or Enter key to complete the edit in the cell is no longer required.
iPropWiz Updater: Fixed regressive bug introduced in 6.0.5.100, files were not copied from Updates folder to install folder.
See special update instructions included in the update zip file.
|
|
6.0.5.102
|
2014-02-19
|
Property Editor: Fixed issue with grid column width not sticking when changing selected documents.
See special update instructions included in the update zip file.
|
|
6.0.5.101
|
2014-02-14
|
Manual Install Method: This build replaces 6.05.100. The manual install method in that build would not update iPropWiz correctly.
See special update instructions included in the update zip file.
|
|
6.0.5.100
|
2014-02-12
|
Property Editor: Fixed memory leak issue that caused Inventor to run out of graphics resources if the PE was active for long periods of time.
Property Editor: Fixed issue with display of thumbnails in the PE browser on some systems.
See special update instructions included in the update zip file.
Property Editor: Fixed issue with PE column widths not retained between Inventor sessions.
Property Editor: Improved functionality of date editor control.
Property Editor: Fixed formatting issues in Comments property editor (rich text editor).
Property Editor: Design state and Yes/No properties can now be edited when multiple documents selected and values vary between the documents.
Property Editor: Fixed issue with mass and volume overrides being lost when material is changed.
iPropWiz Updater: Revised to enable update of any file associated with iPropWiz.
See special update instructions included in the update zip file.
|
|
6.0.4.101
|
2014-01-15
|
Property Editor: Fixed issue with file name not replacing part number when multiple documents selected in an assembly.
Property Editor: Fixed blank message for global save location when exporting current property values.
Property Editor: Fixed issue with mass and volume overrides not reporting correctly when override removed.
Property Editor: Further performance imprvements when changing selected document(s) in an assembly.
|
|
6.0.4.100
|
2013-11-30
|
Configuration Editor: Added configuration option to control action when user selects new documents in an assembly and current documents have pending property changes.
The options are to prompt to save changes (current iPropWiz 6 behavior), change selection without saving pending changes (behavior in single-select mode in iPropWiz 5/5.5), or save changes without notification before changing selection.
Property Editor: Added option to override configuration option described above. To access the override option, right-click the Grid > Grid Settings.
Property Editor: Refined method to ensure undocked PE visibility when second monitor removed.
Property Editor: Improved performance when changing selected document(s) in an assembly.
Property Editor: Fixed issue with PE identifying new documents (i.e. Shrinkwrap part) when creation command (i.e. Create Shrinkwrap part) still in progress.
Property Editor: Bug fixes for display issues.
Configuration Editor: Fixed issue when opening CE while editing component in-place in an assembly.
|
|
6.0.3.116
|
2013-10-21
|
Property Editor: Fixed issue with notification of documents that have missing properties.
Property Editor: Fixed issue where exported parameters were not being automatically formatted with assigned property format rule.
Property Editor: Background startup prevented if configuration folder not yet assigned.
Property Editor: Fixed crash when opening Inventor Presentation file and iPropWiz Property Editor is open.
Configuration Editor: Exported parameter grid formatting fixed.
Configuration Editor: Material list now contains default value row for property assignment when current material does not match any of the materials included in the list.
|
|
6.0.3.115
|
2013-09-01
|
Property Editor: Exported physical properties now updated when migrating part or assembly document.
Property Editor: Automatically starts in background on first document opened.
Property Editor: Detects if saved location of floating PE form is visible on current screen setup. Adjusts position to ensure visibility.
Property Editor: Fixed "Index out of range" error when opening some new documents.
Configuration Editor: Fixed issue with incorrect property set being displayed.
|
|
6.0.3.109
|
2013-06-23
|
Property Editor: Newly created configurations are now immediately available in the Property Editor.
Configuration Editor: Added ability to delete custom property from active document.
Configuration Editor: Fixed issue with including properties referenced in a property expression.
List Editor: Fixed issue with import of list values from Excel.
iPropWiz Updater: Fixed issue with updating help file if new help file marked as read-only.
See special update instructions included in update zip file.
iPropWiz Updater: Removes blocking of new help file (CHM files are commonly blocked if source location is not current machine).
See special update instructions included in update zip file.
|
|
6.0.3.101
|
2013-06-20
|
Property Editor: Fixed issue with assigning new material to multiple selected parts.
Configuration Editor: Added command to Translate iPropWiz v2009/v5 configuration data.
Licensing: Added missing dependant dll to License Server installation. Download the new License Server zip file.
Licensing: Fixed issue with connecting to license server when installing floating license on client machine.
|
|
6.0.1.0
|
2013-06-15
|
Initial release
|